Чашка-свечка
А ещё, когда воск ещё жидкий в него можно залить духи, например из этих маленьких пробничков, и тогда у вас будут пахучие свечи!читать дальшеMaterials
Nested pans
Partially burned candles
Candy or candle thermometer
Tongs
New wicking
Teacups
Wick sustainers
Wooden skewers
Steps
Step 1
In a small pan set over a larger pan of simmering water, melt down old candles; clip the thermometer to the upper pot, and keep temperature at about 185 degrees. Remove old wicks with tongs.
Step 2
Cut a piece of wicking to the cup's height plus 2 inches. Clamp one end to a wick sustainer; tie the other end around a skewer. Dip wicking and sustainer into melted wax to coat them. Remove and stick sustainer to cup's bottom.
Step 3
Pour in the wax, stopping 1/2 inch below the cup's rim. Allow wax to set, about 1 hour. The candle will harden with a well in the center. To even it out, use another skewer to prick a circle of holes about 1/16 inch deep around the wick. Pour in melted wax until surface is 1/4 inch below rim. Cut wick.www.marthastewart.com/273016/teacup-lights
mydarlingpencilskirt.blogspot.de/2012/08/perfum...